Articles

How To - First Time Blade 400 Pilots - Try our DX6i Setup

3/9/2009 by Jim Booker

Copyright:© 2009 Horizon Hobby, Inc.

Print This Article Bookmark This Article
Share This Article

The combination of the E-flite® Blade® 400 helicopter and Spektrum™ DX6i introduced a new level of RTF performance with a fully ready to fly, 3D-capable model. Many pilots are having their first experience with a high performance RC helicopter, and the Blade 400 can be great fun. Mark Padilla, E-flite product developer, has developed some DX6i setup tips that will help the less experienced heli pilot be successful with the Blade 400. In our video, Mark is going to lead us through the DX6i programming setups that will fine-tune the performance of your Blade. Try this out—you will like it.

Watch our video then grab your DX6i, select a new model memory, copy the Blade 400 to a new model setup and make the changes Mark outlines. When you are finished, it will be necessary to bind the model to this new model memory. You can pause the video to allow yourself time to make the changes. You can also download a list of these changes by clicking this link