60-Amp Pro Switch-Mode BEC Brushless ESC

Key Features

  • Up to 60-amp continuous current with proper airflow, 75-amp peak
  • 5-volt switch-mode BEC circuit capable of 2.5-amp continuous current on any recommended input voltage
  • Drives up to 7 analog or 6 digital standard-size servos, with the BEC on any recommended input voltage
  • 3–6S Li-Po, 9- to 18-cell Ni-Cd/Ni-MH input voltage
  • Finned heat sinks
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 70% of battery starting voltage
  • Programmable soft start for helis and airplanes
  • Auto motor shutdown if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges for use with a larger variety of brushless motors
  • Programmable throttle input range (1.1–1.9 ms or 1.2–1.8 ms)
  • Utilizes new smaller MOSFET technology to minimize weight
  • Radio system power on/off switch
  • Pre-wired connectors—E-flite® EC3™ connector on battery input and 3.5mm female gold bullets on motor output leads


When performance matters in your high-current applications, look no further than the E-flite® 60-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 60 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 60-amp Pro switch-mode ESC is truly a ‘pro series’ electronic speed control.

Product Specifications

Brake: Yes - programmable
Continuous Maximum Current: 60A with reasonable cooling
Input Voltage: 10.8V–22.2V
Input Connector Types: 13AWG with E-flite® EC3™ connector
Output Connector Types: 13AWG with 3.5mm female gold bullet connectors
Momentary Peak Current: 75A (15 sec)
Length: 3.00 in (76mm)
Width: 1.30 in (33mm)
Height: 0.50 in (13mm)
Weight: 2.3 oz (66 g)
Wire Gauge: 13AWG
Cells w/BEC: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd

Kit Includes

Articles, Reviews, How-Tos & More

60-Amp Pro Switch-Mode BEC Brushless ESC [EFLA1060]

Selling Price:$84.99*

Find a Retailer
*Avaliable at participating retailers

Similar Products

Related Articles

Product Information